Save Your Tint: A Step-by-Step Guide to Fixing Peeling Window Tinting

Peeling window tint can be a real eyesore and cause frustration for car owners. While it may seem like a daunting task to fix, there are some steps you can take to restore the tint back to its former glory. In this blog, we’ll walk you through a step-by-step guide to fixing peeling window tint and preserving the appearance and functionality of your car’s windows.


Step 1: Identify the Peeling Area

Before you start the process of fixing the peeling tint, it is important to identify the extent of the damage. Look for any bubbling, cracking or chipping along the edges of the tint film or any large sections that are peeling away. This will give you a better idea of how much of the tint needs to be replaced.


Step 2: Remove the Damaged Tint

Once you have identified the damaged area, you need to remove the old and damaged tint film. To do this, use a razor blade or a sharp knife to carefully peel off the tint film. Be sure to do this slowly and carefully so as not to damage the window itself.


Step 3: Clean the Window

After removing the damaged tint, clean the window thoroughly to remove any adhesive residue or debris. You can use a glass cleaner and a microfiber cloth for this step. Make sure to clean the window as thoroughly as possible, leaving no dirt or fingerprints behind.


Step 4: Cut the New Tint Film

Now that the window is clean and prepped, it’s time to cut a new tint film. Measure the size of the window and cut the tint film accordingly, leaving an extra inch or two around the edges. This extra space will be used to secure the tint film in place later on.


Step 5: Apply the Tint Film

With the new tint film cut to size, it’s time to apply it to the window. Start by spraying the window with a solution of soapy water to help the tint film adhere to the glass. Carefully place the tint film onto the window, making sure it is aligned correctly. Once the tint film is in place, use a squeegee to remove any air bubbles and to smooth out the film.


Step 6: Trim the Edges

After applying the new tint film, trim off the excess film along the edges of the window using a sharp blade. Be sure to cut as close to the window as possible to ensure a neat and clean finish.


Step 7: Let it Dry

Finally, let the new tint film dry completely before rolling down the windows or touching the surface. This process usually takes around 24-48 hours, depending on the weather conditions. Avoid getting the window wet or touching the surface during this time to prevent any damage to the new tint film.


While it may seem like a daunting task, fixing peeling window tint is a relatively simple process that can be done at home with the right tools and a bit of patience. However, if you’re unsure or uncomfortable with the process, it’s always best to consult a professional. At San Antonio Window Tint, we offer expert window tinting services for all types of vehicles. Contact us today to schedule an appointment or call us and get your window tinting needs taken care of.